Shank Drills for Screw Tips

Shank Drills of different sizes to bore screw tip holes for Violin, Cello & Bass screws. Made in Germany by Paulus GmbH.

Tempered High Speed Steel (HSS) bits with well defined step where the fluted bit meets the larger shaft. The larger diameter shank allows for precise drilling with optimal control and centering of bit when drilling the inner bore for the screw tips. Each bit is precisely machined from one piece of High Speed Steel.

1) Extended shafts with a larger diameter than the bit area to allow greater piloting control for precise drilling.

2) Tempered High Speed Steel Bits.

3) One piece precisely machined bits.

4) Made in Germany by Paulus GmbH.


Shank Drill for Bow Screw Holes 2.2 mm

2.2 mm Drill Bit with extended 3 mm Shank

Shank Drill for Bow Screw Tip Holes. Made in Germany by Paulus GmbH.

Tempered High Speed Steel (HSS) bit with well defined step where the fluted bit meets the larger shaft. This allows for precise drilling with optimal control and centering of bit when drilling the inner bore for the screw tips. This is precisely machined from one piece of High Speed Steel.



Part # Price Purchase
TCSD2.2MM/225 $ 80.00

Shank Drill for Bow Screw Holes 2.6 mm

2.6 mm Drill Bit with extended 3.3 mm Shank.

Shank Drill for Bow Screw Tip Holes. Made in Germany by Paulus GmbH.

Tempered High Speed Steel (HSS) bit with well defined step where the fluted bit meets the larger shaft. This allows for precise drilling with optimal control and centering of bit when drilling the inner bore for the screw tips. This is precisely machined from one piece of High Speed Steel.


Part # Price Purchase
TCSD2.6MM/226 $ 110.00

Shank Drill for Bow Screw Holes 3.2 mm

3.2 mm Drill Bit with 4 mm extended Shank.

Shank Drill for Bow Screw Tip Holes. Made in Germany by Paulus GmbH.

Tempered High Speed Steel (HSS) bit with well defined step where the fluted bit meets the larger shaft. This allows for precise drilling with optimal control and centering of bit when drilling the inner bore for the screw tips. This is precisely machined from one piece of High Speed Steel.


Part # Price Purchase
TCSD3.2MM/227 $ 150.00

Shank Drill for Bow Screw Holes 3.6 mm

3.6 mm Drill Bit with extended 4.5 mm Shank.

Shank Drill for Bow Screw Tip Holes. Made in Germany by Paulus GmbH.

Tempered High Speed Steel (HSS) bit with well defined step where the fluted bit meets the larger shaft. This allows for precise drilling with optimal control and centering of bit when drilling the inner bore for the screw tips. This is precisely machined from one piece of High Speed Steel.


Part # Price Purchase
TCSD3.6MM/228 $ 150.00

Don't forget the bags!

Violin, Cello & Bass Bow Bags.

PAPER BAGS : We have some brown paper bags left but when they are gone they are gone. We cannot find a manufacturer of this unusual size bag to replenish this stock.

The brown bags are 36 inch length bow bags - extra heavy duty so they can be reused. They are 2 1/2" X 36" and are available in quantities from 5 to 500 !

Brown Paper Extra Heavy Duty Bow Bags

PLASTIC BAGS: Our plastic bags are heavy bags at 3 mil thickness. They are 2.75" wide X 36" length and are clear. These are available in groups of 5 or in packages of 100.

Plastic Extra Heavy Duty Bow Bags